Here is a timely tefillin message from Rabbi Askotzky that he shared with his fellow Chafetz Chaim alumni:
With the commencement of the month of Elul I was reminded of the minhag that some have to check their tefillin and mezuzahs during this time (each year). While I’m not suggesting that you do so each Elul unless it is your minhag I recommend that you take a few moments to look over your batim and retzuos to make sure that they’re in proper order and continue to do so on a monthly basis. The halachah that one is not required to check their tefillin every 3-1/2 years like mezuzah refers to the parshios but not to the outside – the batim and retzuos. These take a beating and may need occasional maintenance. The problem is that most of us don’t have a good handle on the halachos so there is a chance we’ll overlook a problem. Hence, I suggest taking your tefillin to a batim expert (often a sofer will not be an expert) once a year for an outer inspection and preferably to learn basic hilchos batim and retzuos so you can responsibly check them yourself to at least know when there may be a problem.
Any non black spot on the top surface of the retzua that is visible from a normal viewing distance when the tefillin are being worn makes the retzua kosher bedieved at best and possibly passul. Since we all surely want to fulfill the mitzvah at a lechatchila level and I want to be brief I won’t get into detail of when it is passul and when it is bedieved. (A non black spot on the batim is bedieved.) However, it is discussed in my book and in the educational section of my website, www.stam.net.
We’re often rushed in the morning to put on our tefillin and after davening are in a hurry to get to seder, work, do carpool, etc. and once we wrap them up we tend to forget about them until the next morning so we rarely find the time to look over the retzuos. Even when we see that they need a touch up we often forget or push it off. (Minimally, keep a bottle of tefillin paint or a tefillin marker handy.) Furthermore, some of the spots in which the paint commonly wears are often easily overlooked and some need repainting on a regular basis. Hence it is my suggestion that at least when we need a new retzua we take advantage of the handmade, all black retzuos, as this basically eliminates the problem. These retzuos cost just a little more than their traditional counterparts yet can easily last 2-4x as long, if not longer. Note that they are made by a number of reliable makers with various hechsherim and varying prices. The retzua is soaked through with black dye so when the paint on the surface eventually starts to wear they remain black. Hence, until the (typically 15mm wide) retzua stretches to less than 11mm at any given point (or 10mm for Sephardim) they should remain lechatchila.
In addition, the Keses Hasofer (Kitzur Shulchan Aruch) says that the sides should be black. I also saw this in the name of the Gra. Since the retzuos are all black, the sides are black as well so one also gains this hiddur. Finally, the Rambam among others holds that the back side should be black. While we don’t pasken like this and one doesn’t need to be concerned with this opinion, it comes as an added plus due to the retzua being black through and through.
If you’ve any questions on this and any other STAM related matters I’d be happy to be of assistance.
This is the blog connected to Rabbi Askotzky's acclaimed book, Tefillin & Mezuzos, published by Targum Press in 2003 and to www.stam.net, the #1 website for and about Torahs, tefillin, mezuzahs, megillahs and more.
Saturday, September 18, 2010
Tuesday, August 10, 2010
The perfect pen for tefillin repairs
I just came across a blog of a sofer's story about his experience with a new pen for correcting tefillin (and mezuzahs, etc.). I've been checking tefillin for over 20 years and many years ago I experimented with every available techincal pen or rapidograph. I tried Reform, Kohinoor and a few others. No matter if I used the original ink that came with them or sofer's ink (diyo) I had tremendous agmas nefesh. They would get blocked and require a thorough cleaning or air bubbles would form causing ink to flow out, making it impossible to use. I knew an experienced sofer had been using the Rotring brand technical pen and I finally broke down and picked one up (the most expensive) and is was amazing. I finally had to replace it when it fell on the floor and the tip bent. Since then I will only use Rotring and own a number of them and love them! They come with various sides tips. For tefillin and mezuzah the 01, 02 and 03mm tips are perfect as you can get into any spot and precisely place the ink where you want it. I'm surprised the sofer of this blog has just heard about the Rotring, since I thought it has been well known for years that it is by far the best pen.
Now surely some of you are wondering why I am using a pen and not a quill. While a quill should preferably be used for writing, it is accepted that a pen may be used for repairs. It is very difficult and risky to do touch ups with a quill.
The main issue is whether one may use the ink that comes with it or should sofer's ink be used. Some of the technical pen inks have been lab tested and found to not contain problematic ingredients. The main problem is if the black coloring comes from burnt bones from a non kosher animal species. If the black is from a synthetic source or from burnt bones of a kosher animal species then the ink is ok but then there is the question as to whether ink made from traditional ingredients such as sofer's ink, should be used. Some sofrim use sofer's ink and some use the regular ink.
While the techincal pen ink flows well from the Rotring, it is not a simple matter with sofer's ink. The sofer's ink that most use in the technical pen is Hadar #17 as it is very liquidy. The problem is that often you need to go over it a few times for it to be black. Also, it flows better from the 03mm tip and for very tight spots, the 03 can be a little tough. I've recently been told about a newer ink which is supposed to work very well with the Rotring and I plan to check it out.
The other sofer mentioned keeping a little moisture on the pen tip after each use and I agree that it is very helpful.
Now surely some of you are wondering why I am using a pen and not a quill. While a quill should preferably be used for writing, it is accepted that a pen may be used for repairs. It is very difficult and risky to do touch ups with a quill.
The main issue is whether one may use the ink that comes with it or should sofer's ink be used. Some of the technical pen inks have been lab tested and found to not contain problematic ingredients. The main problem is if the black coloring comes from burnt bones from a non kosher animal species. If the black is from a synthetic source or from burnt bones of a kosher animal species then the ink is ok but then there is the question as to whether ink made from traditional ingredients such as sofer's ink, should be used. Some sofrim use sofer's ink and some use the regular ink.
While the techincal pen ink flows well from the Rotring, it is not a simple matter with sofer's ink. The sofer's ink that most use in the technical pen is Hadar #17 as it is very liquidy. The problem is that often you need to go over it a few times for it to be black. Also, it flows better from the 03mm tip and for very tight spots, the 03 can be a little tough. I've recently been told about a newer ink which is supposed to work very well with the Rotring and I plan to check it out.
The other sofer mentioned keeping a little moisture on the pen tip after each use and I agree that it is very helpful.
Sunday, August 1, 2010
Whats the wrap on the all black tefillin straps?
For a more thorough treatment of the laws of retzuos (tefillin straps) read "Are your tefillin straps kosher?".
Many of you have heard about all black tefillin straps or black on both sides. First let me clarify what they are. Before the hides are cut into straps they are dipped into a vat of kosher black dye and are kept in the vat until the dye has soaked totally through the hides. Once dry the top surface is painted, just like regular tefillin straps. Finally, the hides are cut into straps and the top, bottom and (in)sides of the straps are all black.
What are the advantages of all black tefillin straps?
1) While we don't pasken like this opionion, the Rambam and some kabbalistic opinions are that the straps should also be black on the back side.
2) The keses Hasofer (author of the kitzur shulchan aruch) says that the sides of the straps should be black. I was also shown a source that says that this is also the opinion of the Vilna Gaon.
If any part of the tefillin strap is visibly not black in is minimally kosher bedieved (not preferable standard) and can even make the tefillin passul, invalid. With all black straps you never have to be concerned since once the upper layer of paint wears off, the leather is still black beneath!
While some question whether these straps should be used with the claim that if they are okay and have the above advantages then why weren't they made many years ago. Nevertheless, as far as I'm aware, there is no halachic issue with them and a number of major rabbis, including the Badatz Edah Hachareidis, give their approval. Taking into account that a clear majority tefillin with regular tefillin straps are bedieved or passul due to missing/worn off paint then in my humble opinion, these tefillin straps are a lifesaver. For the few that are very careful and know how to properly check their tefillin on a regular basis they can continue wearing regular tefillin straps but for the rest of us who, for whatever reason, know that we are not going to check our tefillin straps properly and often enough, the all black tefillin straps are most worthwhile. The fact is that the difference in price between regular and all black tefillin straps, from the same maker is only around $10. In fact, at http://www.stam.net/, on our tefillin we automatically put on the all black straps, at no additional cost, unless the customer specifically requests standard tefillin straps.
Many of you have heard about all black tefillin straps or black on both sides. First let me clarify what they are. Before the hides are cut into straps they are dipped into a vat of kosher black dye and are kept in the vat until the dye has soaked totally through the hides. Once dry the top surface is painted, just like regular tefillin straps. Finally, the hides are cut into straps and the top, bottom and (in)sides of the straps are all black.
What are the advantages of all black tefillin straps?
1) While we don't pasken like this opionion, the Rambam and some kabbalistic opinions are that the straps should also be black on the back side.
2) The keses Hasofer (author of the kitzur shulchan aruch) says that the sides of the straps should be black. I was also shown a source that says that this is also the opinion of the Vilna Gaon.
If any part of the tefillin strap is visibly not black in is minimally kosher bedieved (not preferable standard) and can even make the tefillin passul, invalid. With all black straps you never have to be concerned since once the upper layer of paint wears off, the leather is still black beneath!
While some question whether these straps should be used with the claim that if they are okay and have the above advantages then why weren't they made many years ago. Nevertheless, as far as I'm aware, there is no halachic issue with them and a number of major rabbis, including the Badatz Edah Hachareidis, give their approval. Taking into account that a clear majority tefillin with regular tefillin straps are bedieved or passul due to missing/worn off paint then in my humble opinion, these tefillin straps are a lifesaver. For the few that are very careful and know how to properly check their tefillin on a regular basis they can continue wearing regular tefillin straps but for the rest of us who, for whatever reason, know that we are not going to check our tefillin straps properly and often enough, the all black tefillin straps are most worthwhile. The fact is that the difference in price between regular and all black tefillin straps, from the same maker is only around $10. In fact, at http://www.stam.net/, on our tefillin we automatically put on the all black straps, at no additional cost, unless the customer specifically requests standard tefillin straps.
Friday, July 30, 2010
Ask the sofer, Torah scribe, at http://www.stam.net
Welcome to our new tefillin and mezuzahs blog. We hope to share with you excerpts from Rabbi Askotzky's book, Tefillin & Mezuzos and other practical and halachic information about tefillin, mezuzahs and more. For starters, we want to introduce you to the free Ask the sofer service. If you have any questions about Torah scrolls, tefillin, mezuzah scrolls or related to the work of a Torah scribe or the scribal arts feel free to submit your question to Rabbi Askotzky and he'll do his best to reply. Before doing so make sure your question isn't already answered on http://www.stam.net/.
Subscribe to:
Posts (Atom)